Panasonic Solar Panels

Following are some of the products we deals with..

380W Anchor by Panasonic Mono PERC Half Cell Solar Module

Features

  •  Brand : ANCHOR by PANASONIC
  •  Item : MONO PERC HALF CELL SOLAR MODULE
  •  Model : AE14H380VHB5B
  •  Type : Mono PERC Panel
  •  Capacity : 380W
  •  Availability : in stock


VIEW BROCHURE

  •  Optimize circuit and decrease internal loss
  •  Decrease module operating temperature and increase power yield
  •  Increase power output
  •  Reduce current mismatch loss
  •  Unique distributed jumping wire design
  •  Decrease hot spot temperature and effect
  •  Strong anti-soiling coatings

385W Anchor by Panasonic Mono PERC Half Cell Solar Module

Features


  •  Brand : ANCHOR by PANASONIC
  •  Item : MONO PERC HALF CELL SOLAR MODULE
  •  Model : AE14H385VHB5B
  •  Type : Mono PERC Panel
  •  Capacity : 385W
  •  Availability : In Stock


VIEW BROCHURE

  •  Optimize circuit and decrease internal loss
  •  Decrease module operating temperature and increase power yield
  •  Increase power output
  •  Reduce current mismatch loss
  •  Unique distributed jumping wire design
  •  Decrease hot spot temperature and effect
  •  Strong anti-soiling coatings

390W Anchor by Panasonic Mono PERC Half Cell Solar Module

Features


  •  Brand : ANCHOR by PANASONIC
  •  Item : MONO PERC HALF CELL SOLAR MODULE
  •  Model : AE14H390VHB5B
  •  Type : Mono PERC Panel
  •  Capacity : 390W
  •  Availability : In Stock


VIEW BROCHURE

  •  Optimize circuit and decrease internal loss
  •  Decrease module operating temperature and increase power yield
  •  Increase power output
  •  Reduce current mismatch loss
  •  Unique distributed jumping wire design
  •  Decrease hot spot temperature and effect
  •  Strong anti-soiling coatings

PHOTOVOLTAIC MODULE HIT

Features


  •  Model No : VBHN330SJ47
  •  Water drainage frame
  •  Power from both sides
  •  Vertically integrated factory
VIEW BROCHURE

The 96-cell high-efficiency HIT® N330 solar panel provides your home with a powerful combination of immediate energy savings, long term performance, and sleek beauty. A remarkably low temperature coefficient of -0.258%/°C helps generate greater electricity output even on the hottest days. Panasonic home solar panels are backed by our industry-leading parts and performance warranty that guarantees minimum power output of 90.76% after 25 years.

  • Enhanced New Frame Design (40mm)
  • Pyramid cell structure design for optimal sunlight capture
  • Low temperature coefficient of -0.258%/°C produces higher power output at high temperatures
  • Heterojunction technology with ultra-thin amorphous silicon layers reduce electron loss
  • Water drainage frame design prevents rain accumulation, eliminates water stains from panel surface
The features of Pansonic HIT™ : Brings out the full energy potential of your roof!
High Efficincy

Makes it possible to maximize the usage of available roof space! Approx 27% more power than 260W competitor panels.

High Temperature stability

Temperature coefficient is what determines stability under high temperature. More power though our the day and year!.

High Generation

Power output : 25 years
Product workmanship : 10 years
RoHS Compliant.
Panasonic HIT™ complies with the directive restricting for the use of certain hazardous substances in electricts the use of hazardous materials, such as lead, cadmium, and mercury, used in the manufacture of electrical and electronic equipment.

PID Resistant :-

Panasonic HIT™ has been tested and confirmed by Fraunhofer Center for Silicon-Photovoltaics (CSP) for potential induced degradation (PID) resistance.


320 Watts Polycrystalline Solar Module

Features


  •  Brand : ANCHOR by PANASONIC
  •  Item : Anchor By Panasonic Poly Solar Module
  •  Model : AE7P320VB5B
  •  Type : Poly Panel
  •  Capacity : 320W
  •  Availability : In Stock
VIEW BROCHURE
  •  High Module Efficiency & industry leading warranty Efficiency up to 17 %
  •  Positive Power Tolerance: Positive tolerance delivers higher output3
  •  Current sorting process: Modules are batched as per current sorting
  •  Extended wind and snow load test: Tested under more stringent test conditions
  •  PID ResistantHigh ResistantHigh PID resistance
  •  Salt mist & Ammonia resistant Suitable for sea shore environment
  •  Extended IEC standards High reliability & durability of modules with extended test as per IEC standards
High module efficiency & Warranty
  •  High efficiency 4 BB cells lead to high module efficiency. Anchor module achieves 16.3 % efficiency, which is higher compared to polycrystalline module family.
  •  4BB design, reduced hot spot risk, higher exposed cell area ensures high performance and reliable product.
  •  High quality material like EVA film, back sheet, glass and frames ensures high performance and reliable product.
  •  Industry leading warranty based on nominal power 97.5 % in first year for years two (2) through to year twenty Five (25) 0.7 % maximum decrease from module power output per year ending with 80 % in 25thYear.
Positive power tolerance
  •  Anchor solar modules 0 to +5 W Positive tolerance.
  •  Product capacity is always in plus side, i.e. 260 Wp polycrystalline solar module shall deliver 260 Wp to 265 Wp power at STC.
Current sorting process
  •  Anchor solar modules are sorted as per the current in different categories like I1, I2 & I3.
  •  All similar category modules are batched and packed together. Hence any module pallet shall have similar kinds of modules.
  •  At the time of installation current sorting process helps in reducing the module mismatch losses.
Extended Wind load &snow load testModule
  •  Dynamic wind tunnel testing with storm wind > 30 m/s. Modules are capable to withstandstorm wind
  •  Modules installed in two different installation methods, after wind tunnel test module shows almost no power loss.
  •  Modules pass enhanced hail storm test ( hails of 40 mm in diameter with 27 m/s speed hit on module
  •  Modules pass dynamic load test (+/-1000 pa, 1000 cycles)

PID resistantModule

   Anchor solar modules pass IEC draft version for PID standards (60 Deg C , 85% RH, and -1000 Volts for 96 hours, power losses < 5%). Observed module power losses are < 2%.


    Salt mist & Ammonia resistant
  •  Solar modules are tested as per IEC 61701 Ed-2, Severity-1.
  •  Solar modules are salt mist corrosion resistant and suitable for installation near sea shore locations.
  •  Tested for Ammonia resistant test in accordance with IEC 62716 Ed. 1.0
Product technical advantages (BOM side)

Makes it possible to maximize the usage of available roof space! Approx 27% more power than 260W competitor panels.

  •  Innovative high quality cells: High efficiency 4 Busbar cells for high andreliable yields
  •  High tech EVA material: Highly transparent and provides extremelystable connection of components.
  •  High UV resistant back sheet: High level of UVA resistance helps to avoiddegradation of module
  •  High quality glass: Anti glare and resistant to dust accumulation ensures higher energy and low maintenance.
  •  Rigid frame and Water proof junction Specially designed hollow chamber profile frameensures rigidity and high performance. IP67 junction box ensures high water proof & ruggedness.
Innovative high quality cells

Reduced internal electrical resistance ensures higher power output:-The distance between busbar is reduced helps in reduction of electrical resistance to the electrons and effectively boost power Output.

  •  Less Chances of micro cracks:-With reduction in electrode size and 4 busbar ensure uniform distribution of stress on the cell. As a result 4 busbar cells are more durable.
  •  4 Busbar design has 15 % less residual stress compared to conventional 3 busbar cell.
  •  Due to reduced stress lower hotspot risk.

High quality EVA

   High volume resistant EVA limits the movement of sodium ions from cell to glass surface thereby effectively preventing PID degradation. EVA with excellent UV performance


High quality UV resistant Back sheet

   After UV exposure , sheet shows high performance, with no yellowing effect as compared to conventional module. UV resistant back sheet ensures high Quality and performance.

High quality UV resistant Back sheet

After UV exposure , sheet shows high performance, with no yellowing effect as compared to conventional module. UV resistant back sheet ensures high Quality and performance.


High quality glass
  •  Anti reflective coating with direct diffusion to the glass ensures high durability, enhanced light absorption and minimal light reflection which results in power gain.
  •  Glass coating prevents accumulation of dust even in desert environment on the surface resulting in less maintenance. Even after sand blowing test Anchor modules have higher light transmission.

Rigid & Less Weight framesAnchorCompetitor
  •  Hollow chamber aluminium alloy frame ensures less weight per m2.
  •  Tested and passed 3800 pa wind load and 5400 pa snow load test provides high strength to module.

325 Watts Polycrystalline Solar Module

Features


  •  Brand : ANCHOR by PANASONIC
  •  Item : Anchor By Panasonic Poly Solar Module
  •  Model : AE7P325VB5B
  •  Type : Poly Panel
  •  Capacity : 325W
  •  Availability : In Stock
VIEW BROCHURE
  •  High Module Efficiency & industry leading warranty Efficiency up to 17 %
  •  Positive Power Tolerance: Positive tolerance delivers higher output3
  •  Current sorting process: Modules are batched as per current sorting
  •  Extended wind and snow load test: Tested under more stringent test conditions
  •  PID ResistantHigh ResistantHigh PID resistance
  •  Salt mist & Ammonia resistant Suitable for sea shore environment
  •  Extended IEC standards High reliability & durability of modules with extended test as per IEC standards
High module efficiency & Warranty
  •  High efficiency 4 BB cells lead to high module efficiency. Anchor module achieves 16.3 % efficiency, which is higher compared to polycrystalline module family.
  •  4BB design, reduced hot spot risk, higher exposed cell area ensures high performance and reliable product.
  •  High quality material like EVA film, back sheet, glass and frames ensures high performance and reliable product.
  •  Industry leading warranty based on nominal power 97.5 % in first year for years two (2) through to year twenty Five (25) 0.7 % maximum decrease from module power output per year ending with 80 % in 25thYear.
Positive power tolerance
  •  Anchor solar modules 0 to +5 W Positive tolerance.
  •  Product capacity is always in plus side, i.e. 260 Wp polycrystalline solar module shall deliver 260 Wp to 265 Wp power at STC.
Current sorting process
  •  Anchor solar modules are sorted as per the current in different categories like I1, I2 & I3.
  •  All similar category modules are batched and packed together. Hence any module pallet shall have similar kinds of modules.
  •  At the time of installation current sorting process helps in reducing the module mismatch losses.
Extended Wind load &snow load testModule
  •  Dynamic wind tunnel testing with storm wind > 30 m/s. Modules are capable to withstandstorm wind
  •  Modules installed in two different installation methods, after wind tunnel test module shows almost no power loss.
  •  Modules pass enhanced hail storm test ( hails of 40 mm in diameter with 27 m/s speed hit on module
  •  Modules pass dynamic load test (+/-1000 pa, 1000 cycles)

PID resistantModule

   Anchor solar modules pass IEC draft version for PID standards (60 Deg C , 85% RH, and -1000 Volts for 96 hours, power losses < 5%). Observed module power losses are < 2%.


    Salt mist & Ammonia resistant
  •  Solar modules are tested as per IEC 61701 Ed-2, Severity-1.
  •  Solar modules are salt mist corrosion resistant and suitable for installation near sea shore locations.
  •  Tested for Ammonia resistant test in accordance with IEC 62716 Ed. 1.0
Product technical advantages (BOM side)

Makes it possible to maximize the usage of available roof space! Approx 27% more power than 260W competitor panels.

  •  Innovative high quality cells: High efficiency 4 Busbar cells for high andreliable yields
  •  High tech EVA material: Highly transparent and provides extremelystable connection of components.
  •  High UV resistant back sheet: High level of UVA resistance helps to avoiddegradation of module
  •  High quality glass: Anti glare and resistant to dust accumulation ensures higher energy and low maintenance.
  •  Rigid frame and Water proof junction Specially designed hollow chamber profile frameensures rigidity and high performance. IP67 junction box ensures high water proof & ruggedness.
Innovative high quality cells

Reduced internal electrical resistance ensures higher power output:-The distance between busbar is reduced helps in reduction of electrical resistance to the electrons and effectively boost power Output.

  •  Less Chances of micro cracks:-With reduction in electrode size and 4 busbar ensure uniform distribution of stress on the cell. As a result 4 busbar cells are more durable.
  •  4 Busbar design has 15 % less residual stress compared to conventional 3 busbar cell.
  •  Due to reduced stress lower hotspot risk.

High quality EVA

   High volume resistant EVA limits the movement of sodium ions from cell to glass surface thereby effectively preventing PID degradation. EVA with excellent UV performance


High quality UV resistant Back sheet

   After UV exposure , sheet shows high performance, with no yellowing effect as compared to conventional module. UV resistant back sheet ensures high Quality and performance.

High quality UV resistant Back sheet

After UV exposure , sheet shows high performance, with no yellowing effect as compared to conventional module. UV resistant back sheet ensures high Quality and performance.


High quality glass
  •  Anti reflective coating with direct diffusion to the glass ensures high durability, enhanced light absorption and minimal light reflection which results in power gain.
  •  Glass coating prevents accumulation of dust even in desert environment on the surface resulting in less maintenance. Even after sand blowing test Anchor modules have higher light transmission.

Rigid & Less Weight framesAnchorCompetitor
  •  Hollow chamber aluminium alloy frame ensures less weight per m2.
  •  Tested and passed 3800 pa wind load and 5400 pa snow load test provides high strength to module.

330 Watts Polycrystalline Solar Module

Features


  •  Brand : ANCHOR by PANASONIC
  •  Item : Anchor By Panasonic Poly Solar Module
  •  Model : AE7P330VB5B
  •  Type : Poly Panel
  •  Capacity : 330W
  •  Availability : In Stock
VIEW BROCHURE
  •  High Module Efficiency & industry leading warranty Efficiency up to 17 %
  •  Positive Power Tolerance: Positive tolerance delivers higher output3
  •  Current sorting process: Modules are batched as per current sorting
  •  Extended wind and snow load test: Tested under more stringent test conditions
  •  PID ResistantHigh ResistantHigh PID resistance
  •  Salt mist & Ammonia resistant Suitable for sea shore environment
  •  Extended IEC standards High reliability & durability of modules with extended test as per IEC standards
High module efficiency & Warranty
  •  High efficiency 4 BB cells lead to high module efficiency. Anchor module achieves 16.3 % efficiency, which is higher compared to polycrystalline module family.
  •  4BB design, reduced hot spot risk, higher exposed cell area ensures high performance and reliable product.
  •  High quality material like EVA film, back sheet, glass and frames ensures high performance and reliable product.
  •  Industry leading warranty based on nominal power 97.5 % in first year for years two (2) through to year twenty Five (25) 0.7 % maximum decrease from module power output per year ending with 80 % in 25thYear.
Positive power tolerance
  •  Anchor solar modules 0 to +5 W Positive tolerance.
  •  Product capacity is always in plus side, i.e. 260 Wp polycrystalline solar module shall deliver 260 Wp to 265 Wp power at STC.
Current sorting process
  •  Anchor solar modules are sorted as per the current in different categories like I1, I2 & I3.
  •  All similar category modules are batched and packed together. Hence any module pallet shall have similar kinds of modules.
  •  At the time of installation current sorting process helps in reducing the module mismatch losses.
Extended Wind load &snow load testModule
  •  Dynamic wind tunnel testing with storm wind > 30 m/s. Modules are capable to withstandstorm wind
  •  Modules installed in two different installation methods, after wind tunnel test module shows almost no power loss.
  •  Modules pass enhanced hail storm test ( hails of 40 mm in diameter with 27 m/s speed hit on module
  •  Modules pass dynamic load test (+/-1000 pa, 1000 cycles)

PID resistantModule

   Anchor solar modules pass IEC draft version for PID standards (60 Deg C , 85% RH, and -1000 Volts for 96 hours, power losses < 5%). Observed module power losses are < 2%.


    Salt mist & Ammonia resistant
  •  Solar modules are tested as per IEC 61701 Ed-2, Severity-1.
  •  Solar modules are salt mist corrosion resistant and suitable for installation near sea shore locations.
  •  Tested for Ammonia resistant test in accordance with IEC 62716 Ed. 1.0
Product technical advantages (BOM side)

Makes it possible to maximize the usage of available roof space! Approx 27% more power than 260W competitor panels.

  •  Innovative high quality cells: High efficiency 4 Busbar cells for high andreliable yields
  •  High tech EVA material: Highly transparent and provides extremelystable connection of components.
  •  High UV resistant back sheet: High level of UVA resistance helps to avoiddegradation of module
  •  High quality glass: Anti glare and resistant to dust accumulation ensures higher energy and low maintenance.
  •  Rigid frame and Water proof junction Specially designed hollow chamber profile frameensures rigidity and high performance. IP67 junction box ensures high water proof & ruggedness.
Innovative high quality cells

Reduced internal electrical resistance ensures higher power output:-The distance between busbar is reduced helps in reduction of electrical resistance to the electrons and effectively boost power Output.

  •  Less Chances of micro cracks:-With reduction in electrode size and 4 busbar ensure uniform distribution of stress on the cell. As a result 4 busbar cells are more durable.
  •  4 Busbar design has 15 % less residual stress compared to conventional 3 busbar cell.
  •  Due to reduced stress lower hotspot risk.

High quality EVA

   High volume resistant EVA limits the movement of sodium ions from cell to glass surface thereby effectively preventing PID degradation. EVA with excellent UV performance


High quality UV resistant Back sheet

   After UV exposure , sheet shows high performance, with no yellowing effect as compared to conventional module. UV resistant back sheet ensures high Quality and performance.

High quality UV resistant Back sheet

After UV exposure , sheet shows high performance, with no yellowing effect as compared to conventional module. UV resistant back sheet ensures high Quality and performance.


High quality glass
  •  Anti reflective coating with direct diffusion to the glass ensures high durability, enhanced light absorption and minimal light reflection which results in power gain.
  •  Glass coating prevents accumulation of dust even in desert environment on the surface resulting in less maintenance. Even after sand blowing test Anchor modules have higher light transmission.

Rigid & Less Weight framesAnchorCompetitor
  •  Hollow chamber aluminium alloy frame ensures less weight per m2.
  •  Tested and passed 3800 pa wind load and 5400 pa snow load test provides high strength to module.